Manualshelf

User Manual

ManualsBrandsStartech ManualsHardwareStarTech.com Secure Tablet Stand, Anti Theft Universal Tablet Holder for Tablets up to 10.5", Lockable Tablet Stand for Desk/ K-Slot Compatible, VESA Mount, Wall Mount Tablet Enclosure Security POS Tablet Stand - stand - for tablet - black
11121314151617181920
11
To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support
5. Align the Large Washers (x 2) over the Pilot Hole. (Figure 9)
6. Align the hole, located towards the front of the Angled
Bracket, with the hole, located in the Large Washers.
7. Insert the Screw Assembly through the Angled Bracket,
the Large Washers, and into the Tabletop and partially
tighten, using a Phillips Head Screwdriver.
8. Adjust the tension of the Screw Assembly to adjust the ease
of rotation.
Mounting Option #3 - Wall Mount
1. Place the Angled Bracket onto the intended mounting
location, on a Wall.
2. Mark the location of the Screw Holes (x 3), using a Pencil.
3. Remove the Angled Bracket and drill appropriately sized
Pilot Holes (x 3) in the Wall, using an Electric Drill.
Figure 10
5 x 20
mm Self
Tapping
Screws
Small Washers