Manualshelf

User Manual

ManualsBrandsStartech ManualsHardwareStarTech.com Secure Tablet Stand, Anti Theft Universal Tablet Holder for Tablets up to 10.5", Lockable Tablet Stand for Desk/ K-Slot Compatible, VESA Mount, Wall Mount Tablet Enclosure Security POS Tablet Stand - stand - for tablet - black
11121314151617181920
10
To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support
4. Thread the Small Washers (x 3) over the 5 x 20 mm Self
Tapping Screws (x 3) to complete the Screw Assemblies.
5. Align the mounting holes, located on the Angled Bracket,
with the Pilot Holes, located in the Tabletop.
6. Insert the Screw Assemblies (x 3) through the Angled
Bracket and into the Tabletop and tighten, using a Phillips
Head Screwdriver. (Figure 8)
Mounting Option #2 - Tabletop - Rotating
1. Place the Angled Bracket onto the intended mounting
location, on a Tabletop.
2. Mark the location of the Screw Hole, located closest to the
front of the Angled Bracket, using a Pencil.
3. Remove the Angled Bracket and drill an appropriately sized
Pilot Hole in the Tabletop, using an Electric Drill.
4. Thread a Small Washer over a 5 x 20 mm Self Tapping
Screw to complete the Screw Assembly.
Figure 9
5 x 20 mm Self Tapping
Screw
Small Washer
Large Washers