User Manual

9
To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support
Mounting the Angled Bracket
• Remove the Adhesive Backing from the Rubber Pads (x 4)
and ax to the base of the Angled Bracket. (Figure 7)
Mounting Option #1 - Tabletop- Fixed
1. Place the Angled Bracket in the intended mounting
location, on a Tabletop.
2. Mark the location of the Screw Holes (x 3), using a Pencil.
3. Remove the Angled Bracket and drill appropriately sized
Pilot Holes (x 3) to an appropriate depth in the Tabletop,
using an Electric Drill.
Figure 7
Rubber Pads
Figure 8
5 x 20 mm Self Tapping
Screws
Small Washers