User Manual

7
To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support
Add the Felt Tape to the Front Plate
1. Remove the Adhesive Backing from the 200 x 5 mm Felt
Tape (x 2) and ax to the long edges of the inside of the
Display Frame, located on the Front Plate. (Figure 2)
2. Remove the Adhesive Backing from the 150 x 10 mm Felt
Tape (x 2) and ax to the short edges of the inside of the
Display Frame, located on the Front Plate.
Add the Foam Blocks to the Rear Plate
1. Remove the Adhesive Backing from the 20 x 15 x 3 mm
EVA Pads (x 4) and ax to the inside edge of the Tabs (x 4),
located on the inside of the Rear Plate. (Figure 3)
Figure 2
Front Plate
200 mm x 5 mm
Felt Tape
150 mm x 10 mm
Felt Tape
Adhesive Backing
Figure 3 Figure 4
20 x 15 mm x 3 mm
EVA Pads
100 x 25 mm
x 20 mm EVA
Pads
100 x 15 mm
x 12 mm EVA
Pads