Technical Specs

Instruction manual
4
Assemble the iPad enclosure
Attach the pads to the plates
1. Use one of the security keys (4) to unlock the plates.
2. Remove the front plate (2) from the rear plate (3) (gure 1).
gure 1
2
3
Security lock
4
3. Turn over the front plate.
4. Remove the backing from four of the 45x15x2 mm EVA pads (10).
5. On the front plate, ax a pad in the center of each of the four sides of the
rectangular-shaped opening (gure 2).
gure 2
2
10
6. Remove the backing from the four 19x16x3 mm EVA pads (5).
7. On the rear plate, ax a pad on the inside of each of the tabs so that the pads are on
the side of the tabs closest to the center of the plate (gure 3).
Security lock