Technical Specs
Instruction manual
10
12
gure 13
13
gure 12
13
12
1
14
1
Set up the iPad enclosure on a table or desk
Remove the backing from the four 12.7x2 mm rubber pads (11) and ax the pads to
the bottom of the mounting bracket (1) (gure 14).
gure 14
11
1
1. Line up the holes on the mounting bracket with the four holes on the back of the
rear plate (3).
2. Use the four M4x8 mm hex screws (8) and the 2.5 mm Allen key (9) to attach the
mounting bracket to the rear plate.
3. Place the SECTBLTPOS on the top of a table or desk.