Operation Manual

Instruction Manual

LED Indicators

The Drive Power/Activity indicator enable you to monitor drive activity. When the

docking station is powered on, the LED will illuminate. While the hard drive is being

accessed, the LED will blink. Do not remove your drive from the docking station

while the LED is ashing, as it could damage to your drive, resulting in data loss.

Disconnecting the Hard Drive

Windows

1. Select the “Safely remove Hardware and Eject Media” icon, located in the task bar.

2. Select the storage device from the list that appears.

3. Wait for the message indicating that it is now safe to remove the device.

Note: Removing the connected drive prior to receiving notication that it is safe to

do so, could result in losing or corrupting data stored on the drive. Once the Safe

to Remove Hardware message appears, please remove the drive from the docking

station. (See Drive Removal.)

Mac OS X

To safely disconnect the attached drive from the host computer, close any windows

listing the contents of the removable drive. Once all windows are closed, click on the

USB storage icon on the desktop, and drag it to the Trash Can icon on the desktop.

Allow 5 seconds before physically removing the drive from the docking station.

Specications

Host Interface

USB 3.0

eSATA

External Connectors

1 x USB 3.0 B female

1 x eSATA female

Internal Connectors

1 x SATA DATA (7 pin) + Power (15 pin)

Receptacle

Maximum Data Transfer Rate

USB 3.0: 5 Gbit/s

eSATA: 6Gbit/s

Compatible Operating Systems Operating System Independent