User Manual

Instruction Manual

Change the custom erase settings

You can customize the erase settings that are applied when you select Custom Erase in

the Eraser mode menu, including setting the number of passes and selecting a pattern

number.

1. Use the Menu navigation buttons on the front of the eraser to move up and down

in the Erase mode menu.

2. Select Custom Erase and press the OK button.

3. Do any of the following:

• To select a pass number, select Setup Pass # and press the OK button. Use the

Menu navigation buttons to select a number between 1 and 99 and press the

OK button.

• To select a pattern count, select Setup Pattern and press the OK button. Use the

Menu navigation buttons to select a number between 1 and 99 and press the

OK button. Use the Menu navigation buttons to select a Data Pattern number

and press the OK button. Use the Menu navigation buttons to select a number

between 1 and 99. Press the OK button.

To return to the Erase mode menu, press the ESC button until you have exited the

Custom Erase settings.