User Guide

Quick Install Guide
DE: Bedienungsanleitung - de.startech.com
FR: Guide de l'utilisateur - fr.startech.com
ES: Guía del usuario - es.startech.com
IT: Guida per l'uso - it.startech.com
NL: Gebruiksaanwijzing - nl.startech.com
PT: Guia do usuário - pt.startech.com
Manual Revision: 07/23/2013
For the most up-to-date information, please visit: www.startech.com
Packaging Contents
• 1X–HDDDuplicator/Eraser
• 2X–SATACables
• 1X–PowerAdapter
• 3X–PowerCords(NA,UK,EU)
• 1X–InstructionManual
• 2X-HDDPads
SATDUP11
1 to 1 Standalone Hard Drive Duplicator and Eraser
NOTE:Pleasevisitwww.startech.com/downloadsforthefull
setofoperatinginstructions.
WARNING!Harddrivesandstorageenclosuresrequirecareful
handling,especiallywhenbeingtransported.Ifyouarenotcareful
withyourharddisk,lostdatamayresult.Alwayshandleyourhard
driveandstoragedevicewithcaution.Besurethatyouareproperly
groundedbywearingananti-staticstrapwhenhandlingcomputer
componentsordischargeyourselfofanystaticelectricitybuild-up
bytouchingalargegroundedmetalsurface(suchasthecomputer
case)forseveralseconds.
Hardware Installation
1. Ensurethepowerswitchissetintheoposition.Connectthe
includedpoweradapterfromanavailableACpoweroutlettothe
PowerAdapterPortonthebackoftheSATDUP11.
2. UsinganincludedSATACable,attachtheHDDyouwouldliketo
duplicatetothesourceport.(SATAportontheleftidentiedas
source,seebelow).
3. UsinganincludedSATACable,connecttheHDDyouwouldliketo
haveoverwritten,orerasedtothetargetport.(SATAportonthe
rightidentiedassource,seebelow)
Note:Foraddedprotection,andheatinsolationthesource
andtargetdrivescanbeplacedonincludedHDDPads.
WARNING!AnyDataremainingonthetargetdrivewillbe
overwritten.
4. Pressthepowerswitchtothe“On”position,theSATDUP11is
nowreadytouse.
Front
1. DisplayScreen
2. Navigationbuttons
3. OKbutton
4. Escbutton
5. SATAHDDsourceport
6. SATAHDDTargetport
Back
1. PowerSwitch
2. PowerAdapterPort
Hardware Operation
Hard Drive Duplication
1. UsingtheNavigationbuttons,locate“1.Copy”andpressOK.
Defaultcopymodeis“SystemandFiles”
2. Theduplicatorwillanalyzethesourcedriveandensurethetarget
isready,byverifyingsize.Oncethedriveshavebeenanalyzedyou
willreceiveanindicatorstatingtheduplicatorisready.PressOK,
andthesystemwillbeginduplicationautomatically.
1
1