Quick Install Guide

DE: Bedienungsanleitung - de.startech.com
FR: Guide de l'utilisateur - fr.startech.com
ES: Guía del usuario - es.startech.com
I T: Guida per l'uso - it.startech.com
NL: Gebruiksaanwijzing - nl.startech.com
P T: Guia do usuário - pt.startech.com
Manual Revision: 02/11/2015
For the most up-to-date information, please visit: www.startech.com
Quick Install Guide
Packaging Contents
• 1 x USB 3.0 rugged 2.5in enclosure
• 1 x USB 3.0 cable
• 1 x Foam pad for 7mm drives
• 1 x Quick install guide
System Requirements
• Computer system with available USB port
• 1x 2.5in SATA Hard drive (HDD) or Solid State Drive (SSD)
Note: StarTech.com recommends using this enclosure with an
SSD to maximize drop protection in rugged environments.
S251BRU33
USB 3.0 rugged 2.5in SSD/HDD enclosure with UASP
*actual product may vary from photos
Product Overview
Hardware Installation
WARNING! Hard drives and storage enclosures require careful
handling, especially when being transported. If you are not careful
with your hard disk, lost data may result. Always handle your hard
drive and storage device with caution. Be sure that you are properly
grounded by wearing an anti-static strap when handling computer
components or discharge yourself of any static electricity build-up
by touching a large grounded metal surface (such as the computer
case) for several seconds.
1. Remove the protective sleeve from the casing, by grasping a
corner and peeling it away from the casing.
2. Grasp drive latch and pull it away from the casing to unlock the
drive door.
1. Protective casing
2. Protective sleeve
3. USB 3.0 port cover
4. USB 3.0 port