User Manual
Table Of Contents
- Compliance Statements
- Safety Statements
- Warning Statements
- Product Diagram (RKCONS1901)
- Front
- Rear
- Product Information
- Packaging Contents
- Hardware Kit Contents
- Requirements
- Installation
- Mounting the Rack Console Drawer
- Grounding the LCD Console
- Connecting the LCD Console
- Opening the LCD Console
- Closing the LCD Console
- Panel Controls and On-Screen Display (OSD) Functions
- LCD Console Panel Menu
- Auto Tuning the Display
- Adjusting the Display’s Brightness
- Adjusting the Display’s Contrast
- Adjusting the Display’s Color Settings
- Adjusting the Image or OSD Position
- Adjusting the Language
- Resetting the LCD Console to Factory Settings
- Exiting the OSD
- LED Indicator
- Configuration
- Testing the LCD Console
- Configuring Display Settings
- Specifications
12
To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support
Opening the LCD Console
1. Move the Release Switch to the unlocked position.
Unlocking the LCD Console
2. Use the Handle to pull the LCD Console out of the Rack
until you hear the LCD Console click into place. The LCD
Console will power On.
3. The LED Indicator on the left of the monitor panel changes
from orange to green.
4. Adjust the Display into the desired position.
Closing the LCD Console
1. Lower the Display until it’s ush against the Keyboard.
2. Slide and hold the two Switches located on the sides of the
LCD Console forward and push the LCD Console in towards
the rear of the rack.
3. Release the two Switches and continue pushing the LCD
Console the rest of the way into the Rack, until you hear an
audible click.