User Manual

12
To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support
Grounding the LCD Console
Note: Grounding is recommended in environments with
high levels of electromagnetic interference (EMI), or frequent
electrical surges.
1. Using a Phillips Head Screwdriver, loosen the Grounding
Connection Screw.
2. Attach the Grounding Wire to the shaft of the Grounding
Connection Screw.
3. Tighten the Grounding Connection Screw, making sure not
to over-tighten.
4. Attach the other end of the Grounding Wire (not connected
to the LCD Console) to a proper earth-ground connection.
Connecting the LCD Console
To connect the LCD Console to a Computer or KVM, perform
the following steps:
1. Turn o the Computer or KVM Switch.
2. Connect the 15-pin Host/KVM Connector on the KVM
Cable to the Host Port on the LCD Console and to a VGA
port and USB port on the rear panel of the Computer or
KVM Switch.
3. Connect the Power Cable to the Power Connection Port on
the LCD Console and to an AC Electrical Outlet.
4. Power on the LCD Console.
5. Power the Computer or KVM back on.