User Manual
Table Of Contents
- Compliance Statements
- Safety Statements
- Warning Statements
- Product Diagram (RKCONS1908K)
- Front
- Rear
- Product Information
- Packaging Contents
- Hardware Kit Contents
- Requirements
- Installation
- Mounting the Rack Console Drawer
- Grounding the LCD Console
- Connecting the LCD Console
- Opening the LCD Console
- Closing the LCD Console
- Panel Controls and On-Screen Display (OSD) Functions
- Console Panel Menu
- OSD
- Accessing the OSD
- Operations/Menu Titles
- Navigation
- Administrator (ADM) Menu
- Accessing the Administrator Menu
- Setting up a User Account
- Setting up User Access
- Turning On/Off Broadcast (BRC) Mode
- Scanning All Ports
- Scanning All Ports That Are Powered On
- Scanning All Quick View Ports
- Performing an Auto Scan
- Configuring the Port ID
- Setting a Default HotKey
- Setting Logout Time Off
- Resetting the Keyboard and Mouse
- Turning the Beeper On/Off
- Turning the Mouse On/Off
- Restoring Factory Settings
- Viewing Console Information
- Editing Port Names
- Setting Quick View Ports
- Logging Out of the OSD
- Hotkeys
- LED Indicator
- Configuration
- Testing the LCD Console
- Configuring Display Settings
- Specifications
- Important Considerations
11
To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support
Installation
Mounting the Rack Console Drawer
Note: It’s easier to install the Rack Console Drawer if an-
other person helps you with the installation.
Warning: Use caution and proper lifting techniques when
installing the Rack Console Drawer.
1. Based on the mounting depth of the server rack that you are
using, select the appropriate length of Mounting Rails.
2. Decide where in the Rack you want to install the Rack
Console Drawer.
3. Insert the M5 Cage Nuts (two per mounting post) into the
square mounting holes on the Rack’s mounting posts.
4. Align the Rear Mounting Brackets (rails) with the M5 Cage
Nuts on the corresponding Rack mounting post.
5. Insert an M5 Screw (two per mounting post) through the
Rear Mounting Bracket (rail) and into the M5 Cage Nut. Do
not tighten the M5 Screws.
6. With assistance, slide the Rack Console Drawer into the
Rack, guiding the Rear Mounting Brackets (rails) into the
rail assembly.
7. Insert an M5 Screw (two per mounting post) through the
Front Mounting Bracket (rail) into the M5 Cage Nut.
8. Use a Phillips Head Screwdriver to tighten the M5 Screws.