User Manual
Table Of Contents
- Warning Statements
- Product Diagram
- Product Information
- Package Contents
- Requirements
- Grounding the Wall-Mount Enclosure
- Locking or Unlocking the Front Door
- Removing the Side Panels
- Replacing the Side Panels
- Removing the Cable Access Cover
- Replacing the Cable Access Cover
- Reversing the Front Door
- Adjust the Depth of the Mounting Rails
- Use the Mounting Rail Tapped Holes
- Mount the Enclosure to the Wall
- Installing Equipment
17
To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support
Reversing the Front Door
To accommodate dierent rack congurations, you can reverse
the Front Door of the Wall-Mount Enclosure so that it opens
to the left or right of the Wall-Mount Enclosure. The Front
Door is attached to the Wall-Mount Enclosure with Levers
that are located at the top and bottom of the Front Door.
1. In the top corner of the inside of the Front Door, pull the
lever down and move the top corner of the Front Door away
from the Wall-Mount Enclosure.
2. In the bottom corner of the inside of the Front Door, pull
the lever up and remove the Front Door from the Wall-
Mount Enclosure.
Lever Location
3. Flip the Front Door so that the Levers are located on the
opposite side.
4. Position the Front Door so that the top and bottom Levers
are aligned with the washers located in the hinge area of the
Wall-Mount Enclosure.