User Manual
Table Of Contents
- Warning Statements
- Product Diagram
- Product Information
- Package Contents
- Requirements
- Grounding the Wall-Mount Enclosure
- Locking or Unlocking the Front Door
- Removing the Side Panels
- Replacing the Side Panels
- Removing the Cable Access Cover
- Replacing the Cable Access Cover
- Reversing the Front Door
- Adjust the Depth of the Mounting Rails
- Use the Mounting Rail Tapped Holes
- Mount the Enclosure to the Wall
- Installing Equipment
16
To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support
2. Pull the Cable Access Cover away from the Wall-Mount
Enclosure.
Removing the Cable Access Cover
Replacing the Cable Access Cover
1. Align the Cable Access Cover with the Cable Access
Opening.
2. Use a Phillips Head Screwdriver to insert the four Screws
through the Cable Access Cover and into the Wall-Mount
Enclosure.
3. Tighten the Screws, being careful not to over-tighten.