User Manual

15
To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support
3. While pulling the two Tabs, lift the Side Panel free from the
Wall-Mount Enclosure. Be careful and use proper lifting
techniques when removing the Side Panels from the Wall-
Mount Enclosure.
4. Repeat steps 1 to 3 to remove the other Side Panel.
Replacing the Side Panels
1. Place one of the Side Panels in the groove at the bottom of
the Wall-Mount Enclosure.
2. Pull the two Tabs on the Side Panel towards the center of
the panel.
3. Push the top part of the Side Panel into the Wall-Mount
Enclosure and release the Tabs.
4. Use one of the provided Side Panel Keys to lock the Side
Panel.
Removing the Cable Access Cover
Both the top and bottom panels of the enclosure have cable
access covers that you can remove to access and manage your
cables.
1. Use a Phillips Head Screwdriver to remove the four Screws
securing the Cable Access Cover.