User Manual
Table Of Contents
- Warning Statements
- Product Diagram
- Product Information
- Package Contents
- Requirements
- Grounding the Wall-Mount Enclosure
- Locking or Unlocking the Front Door
- Removing the Side Panels
- Replacing the Side Panels
- Removing the Cable Access Cover
- Replacing the Cable Access Cover
- Reversing the Front Door
- Adjust the Depth of the Mounting Rails
- Use the Mounting Rail Tapped Holes
- Mount the Enclosure to the Wall
- Installing Equipment
13
To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support
Grounding the Wall-Mount Enclosure
Warning! This product must be grounded. Do not use this
product without an earth ground connection.
1. Use an M6 Screw to attach a Grounding Wire to the front or
rear Grounding Point on the Wall-Mount Enclosure.
Installing the Grounding Wire
2. Route the Grounding Wire under the frame of the Wall-
Mount Enclosure and connect the Grounding Wire to your
facility’s earth ground connection.