User Manual
Table Of Contents
- Compliance Statements
- Safety Statements
- Safety Measures
- Warning Statements
- Product Information
- Package Contents
- Requirements
- Unpacking the Rack
- Installation
- Leveling the Rack
- Installing the Cage Nuts
- Removing the Front and/or Rear Door
- Removing the Side Panels
- Installing the Side Panels
- Removing the Roof Panel
- Grounding the Rack
- Adjusting the Vertical Mounting Rails or Cable Management Rails
- Baying Multiple Racks Together
23
To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support
3. Slide the Mounting Rail to access the Cage Nuts. Remove
the Cage Nuts from the Depth Adjustment Rails by applying
pressure to both sides of the Cage Nut.
- or -
Use a Cage Nut Wrench to remove the Cage Nuts from the
Depth Adjustment Rails.
Number Description
1 Mounting Rail
Notes: The distance between each of the Mounting Rail
Adjustment Holes is 1/4 inch.
4. Once you have determined the mounting depth reinsert the
Cage Nuts into the Depth Adjustment Rails.
1