User Manual
Table Of Contents
- Compliance Statements
- Safety Statements
- Safety Measures
- Warning Statements
- Product Information
- Package Contents
- Requirements
- Unpacking the Rack
- Installation
- Leveling the Rack
- Installing the Cage Nuts
- Removing the Front and/or Rear Door
- Removing the Side Panels
- Installing the Side Panels
- Removing the Roof Panel
- Grounding the Rack
- Adjusting the Vertical Mounting Rails or Cable Management Rails
- Baying Multiple Racks Together
15
To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support
2. Apply pressure to both sides of the Cage Nut. Insert the Cage
Nut Clamps into the Cage Nut Hole and release the Cage
Nut.
- or -
Use the included Cage Nut Wrench to install the Cage Nuts
into the Rack.
3. Use the M6 Screws to secure the device into place.
4. If your device has mounting brackets with hooks, hook the
bracket to the position where you want your device to go.