User Manual
Table Of Contents
- Compliance Statements
- Safety Statements
- Safety Measures
- Warning Statements
- Product Information
- Package Contents
- Requirements
- Unpacking the Rack
- Installation
- Leveling the Rack
- Installing the Cage Nuts
- Removing the Front and/or Rear Door
- Removing the Side Panels
- Installing the Side Panels
- Removing the Roof Panel
- Grounding the Rack
- Adjusting the Vertical Mounting Rails or Cable Management Rails
- Baying Multiple Racks Together
13
To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support
2. Using an 18 mm Open-Ended Wrench, lower one of the
Levelers by turning it clockwise until the base of the Leveler
is tightly pressed against the surface, supporting the weight
of the Rack.
Number Description
1 Leveler
3. Place the Level on the top of the Rack to ensure that the
Levelers are adjusted correctly. If the Rack is not level make
the required adjustments to the Levelers until the Rack is
Level.
1