User Manual
Table Of Contents
- Compliance Statements
- Safety Statements
- Safety Measures
- Warning Statements
- Product Information
- Package Contents
- Requirements
- Unpacking the Rack
- Installation
- Leveling the Rack
- Installing the Cage Nuts
- Removing the Front and/or Rear Door
- Removing the Side Panels
- Installing the Side Panels
- Removing the Roof Panel
- Grounding the Rack
- Adjusting the Vertical Mounting Rails or Cable Management Rails
- Baying Multiple Racks Together
11
To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support
Unpacking the Rack
Warnings: The Rack is heavy and you should exercise cau-
tion when you remove it from the pallet.
At least three people are required to unpack the Rack. Do not
attempt to unpack the Rack by yourself.
1. Carefully move the shipping pallet to a level surface.
2. Remove the Tie Straps from the shipping carton.
3. Remove the shipping carton from the shipping pallet, being
careful not to tip the Rack.
4. The 1U Cabinet Shelf box will be shipped in the Rack’s
interior.
5. Remove the Tie Straps from 1U Cabinet Shelf box and
carefully lift the 1U Cabinet Shelf box out of the Rack
through either the front or rear door.
6. Using a Socket and Wrench, remove the Bolts from the
Brackets.
Note: Make sure that at least one person is holding the Rack
in place while removing the brackets.
7. Carefully remove the Rack from the pallet and place it on a
rm surface.