5U Open Frame Wall Mount Rack 12-20 in. Adjustable Depth RK15WALLOA *actual product may vary from photos FR: Guide de l’utilisateur - fr.startech.com DE: Bedienungsanleitung - de.startech.com ES: Guía del usuario - es.startech.com NL: Gebruiksaanwijzing - nl.startech.com PT: Guia do usuário - pt.startech.com IT: Guida per l’uso - it.startech.com For the latest information, technical specifications, and support for this product, please visit www.StarTech.com/RK15WALLOA.
Use of Trademarks, Registered Trademarks, and other Protected Names and Symbols PHILLIPS® is a registered trademark of Phillips Screw Company in the United States or other countries. This manual may make reference to trademarks, registered trademarks, and other protected names and/or symbols of third-party companies not related in any way to StarTech.com. Where they occur these references are for illustrative purposes only and do not represent an endorsement of a product or service by StarTech.
Warning statements Dichiarazioni di avvertenza Make sure that you assemble this product according to the instructions. Assicurarsi di Assemblare il prodotto secondo le istruzioni. Read the entire manual and make sure that you understand the instructions before you start to assemble and use this product. Leggere l’intero manuale e assicurarsi di aver compreso tutte le istruzioni prima di iniziare ad assemblare e a utilizzare questo prodotto. Never operate this product if parts are missing or damaged.
Advertencias de uso Asegúrese de ensamblar este producto según las instrucciones. Lea todo el manual y asegúrese de haber comprendido bien las instrucciones antes de proceder con el ensamblaje y el uso de este producto. Nunca opere o ponga en funcionamiento este producto si faltan piezas o hay daños en las mismas. Asegúrese de no exceder la capacidad de peso de este producto. La sobrecarga de este producto puede causar lesiones personales o daños en la propiedad.
Table of Contents Warnings....................................................................................................................................................... i Product diagram.....................................................................................1 Product dimensions................................................................................2 Adjustment options................................................................................3 Package contents.............
Product diagram 2 6 2 2 3 3 3 3 5 4 1 1 3 4 5 3 3 2 2 6 2 1 - Vertical rails 2 - Assembly screws 3 - Bolts 4 - Mounting holes 5 - Rear horizontal brackets 6 - Front horizontal brackets Instruction manual 1 3
Product dimensions Back view Front view 504 mm 20 in. 775 mm 30 in. 305 mm 12 in. 406 mm 16 in. 465 mm 18 in. 450 mm 18 in. Top view Minimum depth Top view Maximum depth 508 mm 20 in. 508 mm 20 in. 504 mm 20 in. 305 mm 12 in.
Adjustment options You can adjust the depth in increments of 25 mm (1 in.) from 305 mm (12 in.) to 508 mm (20 in.). Side view 305 mm 12 in. 330 mm 13 in. 356 mm 14 in. 508 mm 20 in.
Package contents • 2 x vertical rails • 2 x front horizontal brackets • 2 x rear horizontal brackets • 60 x M6 cage nuts • 60 x M6 screws • 60 x plastic washers • 16 x assembly screws • 24 x flat washers • 24 x bolts • 1 x instruction manual Requirements • Phillips type screwdriver • Appropriate tools and mounting hardware for the type of wall that you’re using Requirements are subject to change. For the latest requirements, please visit www.StarTech.com/RK15WALLOA.
Assembly To make the assembly easier to complete, consider assembling the RK15WALLOA with another person’s assistance. Assemble the brackets The RK15WALLOA features adjustable brackets that you can set to the depth that you require. The adjustment holes on the brackets are spaced 25 mm (1 in.) apart. The minimum depth you can set the brackets to is 305 mm (12 in.) and the maximum depth is 508 mm (20 in.). 1. Slide one of the rear horizontal brackets into one of the front horizontal brackets. 2.
Attach the vertical rails 1. Place one of the vertical rails inside one of the bracket assemblies and line up the assembly holes. 2. At the front and side of the front horizontal bracket, use a Phillips type screwdriver to insert four of the assembly screws through the front horizontal bracket and into the vertical rail. 3. Repeat steps 1 and 2 to attach the other vertical rail to the bracket assemblies. Attach the bracket assembly 1.
Mount the RK15WALLOA on a wall Warning! Remove all equipment from the wall-mount rack before you attempt to mount it on a wall. Warning! Wall structures vary and it is important to make sure that the type of wall structure and mounting hardware that you are using will properly support the mounted equipment. Failure to do so might result in personal injury and/or equipment damage. The wall structure should be capable of supporting at least four times the weight of the mounted equipment.
Install equipment Warning! Do not add equipment to the wall-mount rack until it is securely attached to the wall. Warning! When you load equipment into the wall-mount rack, load the heaviest equipment in the bottom section of the rack first. Continue loading equipment in a descending order of weight, so that the lighter equipment is installed in the upper sections of the wall-mount rack and the heavier items are on the bottom.
Technical support StarTech.com’s lifetime technical support is an integral part of our commitment to provide industry-leading solutions. If you ever need help with your product, visit www.startech.com/support and access our comprehensive selection of online tools, documentation, and downloads. For the latest drivers/software, please visit www.startech.com/downloads Warranty information This product is backed by a five-year warranty. StarTech.
Hard-to-find made easy. At StarTech.com, that isn’t a slogan. It’s a promise. StarTech.com is your one-stop source for every connectivity part you need. From the latest technology to legacy products — and all the parts that bridge the old and new — we can help you find the parts that connect your solutions. We make it easy to locate the parts, and we quickly deliver them wherever they need to go. Just talk to one of our tech advisors or visit our website.
