User Manual

18
To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support
29. Angle the bottom corner of the Front Door towards the
Door Hinge Pin.
30. Insert the Door Hinge Pin into the bottom Hinge Pin Hole
on the Front Door.
31. In the top corner on the Front Door, pull the Spring-
Loaded Hinge Pin down.
32. While holding down the Spring-Loaded Hinge Pin, angle
the top corner of the Front Door towards the top corner of
the Server Rack, aligning the Spring-Loaded Hinge Pin
with the Hinge Pin Hole.
33. Release the Spring-Loaded Hinge Pin into the Hinge Pin
Hole.
34. Repeat steps 16 - 18 to install the Rear Door.
Leveling the Server Rack
The Server Rack will need to be properly level prior to installing
any rack equipment, to ensure stability. The surface the Server
Rack is located on must also be a at, level surface in order
to support the combined weight of the Server Rack and rack
equipment installed.
1. Determine the location of the Server Rack. Use a Spirt/
Bubble Level to ensure that the location’s surface is a at,
level surface.