User Manual
Table Of Contents
- Compliance Statements
- Safety Statements
- Warning Statements
- Product Diagram
- Product Information
- Package contents
- Requirements
- Ground the Enclosure
- Lock or unlock the front or rear door
- Remove the side panels
- Installing the Side Panels
- Access your cables
- Replacing the Cable Covers
- Reverse the front door
- Adjust the depth of the mounting rails
- Mount the enclosure to the wall
- Install equipment
19
To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support
Install equipment
Warning! Do not add equipment to the enclosure until the
enclosure is securely attached to the wall.
When you load equipment into this enclosure, load the
heaviest equipment in the bottom section of this enclosure
rst. Continue loading equipment in a descending order of
weight, so that the lighter equipment is installed in the upper
sections of this enclosure and the heavier items are on the
bottom.
This enclosure comes with cage nuts and screws but the
equipment you’re installing may come with mounting
hardware. Consult the documentation that came with the
equipment to determine the best mounting hardware that you
should use and how you should install it.
1. Decide where in the enclosure you want to install the
equipment and insert the cage nuts in the mounting rails.
2. Line up the mounting holes on the equipment with the cage
nuts.
3. Insert the screws through the mounting holes on the
equipment and into the cage nuts.