User Manual
Table Of Contents
- Compliance Statements
- Safety Statements
- Warning Statements
- Product Diagram
- Product Information
- Package contents
- Requirements
- Ground the Enclosure
- Lock or unlock the front or rear door
- Remove the side panels
- Installing the Side Panels
- Access your cables
- Replacing the Cable Covers
- Reverse the front door
- Adjust the depth of the mounting rails
- Mount the enclosure to the wall
- Install equipment
16
To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support
Door Release Levers
3. Flip the front door so that the levers are located on the
opposite side.
4. Position the front door so that the top and bottom levers are
aligned with the washers located in the hinge area of the
enclosure.
5. In the top corner of the front door, pull the lever down and
release it into the washer and hole in the enclosure.
6. In the bottom corner of the front door, pull the lever up and
release it into the washer and hole in the enclosure.