User Manual
Table Of Contents
- Compliance Statements
- Safety Statements
- Warning Statements
- Product Diagram
- Product Information
- Package contents
- Requirements
- Ground the Enclosure
- Lock or unlock the front or rear door
- Remove the side panels
- Installing the Side Panels
- Access your cables
- Replacing the Cable Covers
- Reverse the front door
- Adjust the depth of the mounting rails
- Mount the enclosure to the wall
- Install equipment
11
To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support
Ground the Enclosure
Warning! This product must be grounded. Do not use this
product without an earth ground connection.
1. Use an M6 screw to attach a grounding wire to the front or
rear grounding point on the enclosure.
2. Route the wire under the frame of the enclosure and
connect the wire to your facility’s earth ground connection.
Grounding Wire