User Manual

20
2. Turn the Grey Adjustment Knob in a Clockwise direction
to adjust the Projected Image to the right.
- or -
Turn the Grey Adjustment Knob in a Counterclockwise
direction to adjust the Projected Image to the left. (Figure
14)
3. Tighten the Adjustment Screw, located next to the Grey
Adjustment Knob, using the 10 mm Wrench.
Adjust the Tilt
Turn the Yellow Adjustment Knob in a Clockwise direction
to adjust the Projected Image down.
- or -
Turn the Yellow Adjustment Knob in a Counterclockwise
direction to adjust the Projected Image up. (Figure 15)
Figure 14
To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support