Manualshelf

User Manual

ManualsBrandsStartech ManualsAccessoriesStarTech.com Universal Projector Wall Mount, Projector Mount supports Short & Ultra Short Throw Projectors up to 33lb (15kg), Tilt/Swivel/Rotate, Adjustable height 16.5" to 27.7" from Wall In-wall Cable Routing - bracket - adjustable arm - for projector -
21222324252627282930
18
To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support
4. Slide the Upper and Lower Decorative Covers together,
over the Wall Bracket, until the two Covers snap into place.
Note: To remove these Decorative Covers, press the sides at
the top of the Lower Decorative Cover and pull apart.
5. Connect the Power Cable to an available Power Source.
Connect the Video Cable to the Video Source Device.
Operation
Adjust the Wall Mount Tilt Angle
1. Remove the Upper and Lower Decorative Covers.
Note: To remove these Decorative Covers, press the sides at
the top of the Lower Decorative Cover and pull apart.
Figure 12
Plastic
Tab
Upper Decorative
Cover
Lower Decorative Cover