User Manual

ManualsBrandsStartech ManualsAccessoriesStarTech.com Universal Projector Wall Mount, Projector Mount supports Short & Ultra Short Throw Projectors up to 33lb (15kg), Tilt/Swivel/Rotate, Adjustable height 16.5" to 27.7" from Wall In-wall Cable Routing - bracket - adjustable arm - for projector -

16

6. Insert the Pole End Cap into the Projector Pole until it

snaps into place. (Figure 10)

Note: Pinch the sides and top of the Pole End Cap during

insertion.

7. Adjust the length of the Projector Pole by pulling apart to

lengthen and pushing together to shorten. Tighten the two

5 mm Hex Bolts located underneath, using the 5 mm Hex

Key. (Figure 11)

To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support

Figure 10

Pole End Cap

Projector Pole