Manualshelf

User Manual

ManualsBrandsStartech ManualsAccessoriesStarTech.com Universal Projector Wall Mount, Projector Mount supports Short & Ultra Short Throw Projectors up to 33lb (15kg), Tilt/Swivel/Rotate, Adjustable height 16.5" to 27.7" from Wall In-wall Cable Routing - bracket - adjustable arm - for projector -
21222324252627282930
14
2. Thread the two M6 x 10 mm Screws through the
Adjustment Module and into the Hinge Connector. Hand
tighten the M6 x 10 mm Screws by one rotation. (Figure 6)
Note: There must be a 2-3 mm gap between the Adjustment
Module and the Hinge Connector in order to complete the
following installation steps.
3. Slide the Projector Mount Assembly onto the Projector
Pole. Ensure the grooves in the Projector Pole are aligned
with the 2-3 mm gap created in Step 2. Ensure the weight of
the Projector is supported during this step. (Figure 7)
Figure 7
Projector Pole
Projector
Mount
Assembly
Figure 6
Adjustment
Module
Hinge Connector
M6 x 10 mm Screw
10 mm Wrench