Manualshelf

User Manual

ManualsBrandsStartech ManualsAccessoriesStarTech.com Universal Projector Wall Mount, Projector Mount supports Short & Ultra Short Throw Projectors up to 33lb (15kg), Tilt/Swivel/Rotate, Adjustable height 16.5" to 27.7" from Wall In-wall Cable Routing - bracket - adjustable arm - for projector -
11121314151617181920
Figure 4
Nut
Mounting Arm
Cover
Washer
Variable Position
Screw
Adjustment Module
12
5. Place the Mounting Arm Covers over the Mounting Arms.
Attach the Adjustment Module
1. Place the Adjustment Module onto the Mounting Arms.
Align the Variable Position Screws with the cutouts in the
Adjustment Module. (Figure 4)
Note: If the Adjustment Module does not t onto the
Mounting Arms, loosen the M-Type Screws with a Phillips
Head Screwdriver and readjust the position of the
Mounting Arms. Tighten the M-Type Screws once the
correct position has been achieved.
To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support