Manualshelf

User Manual

ManualsBrandsStartech ManualsAccessoriesStarTech.com Universal Projector Wall Mount, Projector Mount supports Short & Ultra Short Throw Projectors up to 33lb (15kg), Tilt/Swivel/Rotate, Adjustable height 16.5" to 27.7" from Wall In-wall Cable Routing - bracket - adjustable arm - for projector -
11121314151617181920
11
To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support
2. Place the four Mounting Arms onto the Projector, with
the tubular portion of the Mounting Arms aligned over the
Mounting Holes in the Projector. (Figure 3)
Note: The threads of the Variable Position Screws, that are
built into the Mounting Arms, should be facing upwards.
3. Thread the appropriately sized M-Type Screws (e.g. M4 x
24 mm Screws) through the Mounting Arms and into the
Projector.
4. Tighten the M-Type Screws with a Phillips Head
Screwdriver.
Warning! Do not over-tighten the M-Type Screws. If you
encounter any unexpected resistance, immediately stop and
attempt to use a dierent length of M-Type Screw.
Figure 3
Projector
Mounting Arm
Mounting Arm Cover
Variable Position Screw