Manualshelf

User Manual

ManualsBrandsStartech ManualsAccessoriesStarTech.com Universal Projector Wall Mount, Projector Mount supports Short & Ultra Short Throw Projectors up to 33lb (15kg), Tilt/Swivel/Rotate, Adjustable height 16.5" to 27.7" from Wall In-wall Cable Routing - bracket - adjustable arm - for projector -
11121314151617181920
10
To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support
2. (Optional, For In-Wall Cable Management) Feed the Power
and Video Cables into the Wall. Connect the Power Cable
to an available Power Source. Connect the Video Cable to
the Video Source Device.
3. Press the Projector Pole into the Wall Mount and hold the
Projector Pole in place. Align the four holes in the Projector
Pole with the four holes in the Wall Mount.
Attach the Projector Pole to the Wall Mount
• Thread the four M6 x 8 mm Hex Screws through the Wall
Mount and into the Projector Pole. Tighten using the 5 mm
Hex Key.
(Figure 2)
Attach the Mounting Arms
1. Place the Projector on a at and level Surface, with the
Mounting Holes facing upwards.
Figure 2
Wall Mount
Projector Pole
M6 x 8 mm Screws