Manualshelf

User Manual

ManualsBrandsStartech ManualsAccessoriesStarTech.com Universal Projector Wall Mount, Projector Mount supports Short & Ultra Short Throw Projectors up to 33lb (15kg), Tilt/Swivel/Rotate, Adjustable height 16.5" to 27.7" from Wall In-wall Cable Routing - bracket - adjustable arm - for projector -
11121314151617181920
9
Installation
Fasten the Wall Bracket to a Wall
Warning! The Universal Projector Wall Mount is
designed to be installed on a wood stud, solid concrete, or
cinder block wall. The wall structure should be capable of
supporting at least four times the weight of the mounted
equipment. The Mounting Hardware included with this
product may not be adequate for installation on certain
wall structures. Contact a construction professional to install
the Universal Projector Wall Mount. Failure to do so may
result in personal injury and/or equipment damage.
PROJWALLMNT can be mounted using the included Mounting
Hardware. Ensure the top of the Wall Bracket is level with
a Spirit/Bubble Level before fastening it to the Mounting
Surface.
Cable Routing
1. Route the Power and Video Cables through the Projector
Pole. (Figure 1)
Figure 1
Wall Mount
Projector Pole