User Manual

ManualsBrandsStartech ManualsDisplays & ProjectorsStarTech.com Monitor Privacy Screen for 24 inch PC Display, Computer Screen Security Filter, Blue Light Reducing Screen Protector Film, 16:9 Widescreen, Matte/Glossy, +/-30 Degree Viewing Blue Light Filter - display privacy filter - 24" wide - TAA Complia

Quick-Start Guide

To view manuals, FAQs, videos, drivers, downloads, technical drawings, and more, visit www.startech.com/support.

Manual Revision: June 10, 2021 10:08 AM

Product Diagram (PRIVSCNMONxx and PRIVACY-SCREEN-xx)

Component Function

1 Privacy Filter

• Privacy comes into eect when viewing

anywhere past 30 degrees from the left and

right of center

• Total eld of view of 60 degrees

2 Mounting Tabs (x 5)

• Secure the Privacy Filter to the Monitor’s

surface

• The adhesive on the Mounting Tabs

becomes less eective with frequent removal/

reapplication

Adhesive Strips (not

displayed)

• Secure the Privacy Filter to the Monitor’s

surface

• The Adhesive Strips become less eective

with frequent removal/reapplication

Package Contents

• Privacy Screen x 1

• Set of Adhesive Strips x 1 (screens up to 27”) or x 2 (screens larger than 27”)

• Set of Mounting Tabs x 1

• Wiping Cloth x 1

• Quick Start Guide x 1

Requirements

For the latest requirements, please visit the following link and replace “xx” with the desired

privacy lter size / SKU:

www.startech.com/PRIVSCNMONxx

www.startech.com/PRIVACY-SCREEN-xx

Universal Privacy Filter

Install the Privacy Filter -- Adhesive Strips

For installations that are intended to be permanent, or if the Monitor does not feature

large Bezels, please use the Adhesive Strips.

1. Clean the Laptop Display and Bezels, using the Wiping Cloth.

2. Select the side of the Privacy Filter that is intended to face outward (i.e. matte or

glossy side) and place the Privacy Filter on a clean and at surface with the selected

side facing down.

3. Remove all the Adhesive Strips from the Transparent Lining.

Removing the Adhesive Strips

4. Carefully align the Adhesive Strips along the edges (top, bottom, left, and right) of

the Privacy Filter and ax to the Privacy Filter by applying rm pressure to all the

Adhesive Strips.

Applying the Adhesive Strips

5. Carefully remove the Protective Backing from the Adhesive Strips, exposing the

screen side adhesive.

Remove the Protective Backing from the Adhesive Strips

2/3

Summary of content (2 pages)

PAGE 1
Quick-Start Guide Universal Privacy Filter Product Diagram (PRIVSCNMONxx and PRIVACY-SCREEN-xx) Install the Privacy Filter -- Adhesive Strips For installations that are intended to be permanent, or if the Monitor does not feature large Bezels, please use the Adhesive Strips. 1 1. Clean the Laptop Display and Bezels, using the Wiping Cloth. 2. Select the side of the Privacy Filter that is intended to face outward (i.e.
PAGE 2
6. Apply the Privacy Filter to the Monitor Screen, adhesive side toward the Screen. Start at the bottom edge of the Screen and work your way to the top. 3. Remove the Protective Backing from the Mounting Tabs, exposing the adhesive. Removing Protective Backing Applying the Privacy Filter 7. Carefully apply gentle pressure to locations on the Privacy Filter where the Adhesive Strips were placed. 4. Apply the Mounting Tabs to the Bezels.