Installation Instructions

External
Ports
3 - USB 3.0 A (9 pin; SuperSpeed) Female
External
Ports
1 - RJ-45 Female
Internal Ports 1 - SATA Power (15 pin) Plug
OS
Compatibility
Windows® 8 / 8.1 (32/64bit), 7 (32/64), Vista (32/64), XP (32/64)
Windows Server® 2012, 2008 R2
Linux 2.6.31 and up (Tested up to 3.5)
Note The maximum throughput of this card is limited by the bus interface. If used with PCI Express
Gen 1.0 enabled computers, the max throughput is 2.5 Gbps. If used with PCI Express Gen 2.0
enabled computers, the max throughput is 5 Gbps.
Note UASP (USB Attached SCSI Protocol), is supported in Windows 8, 8.1, Server 2012 and Linux
kernel 2.6.37 or later. Test results were obtained using an Intel® Ivy Bridge system,
StarTech.com add-on USB 3.0 cards, a UASP-enabled StarTech.com enclosure, and a SATA III
solid-state drive.
System and
Cable
Requirements
PCI Express enabled computer with an available PCI Express x1 slot or higher (x4, x8, x16)
System and
Cable
Requirements
SATA power connector (recommended, but optional)
Product
Height
4.7 in [120 mm]
Product
Length
3 in [77 mm]
Product
Weight
2.1 oz [60 g]
Product
Width
0.7 in [18 mm]
LED
Indicators
1 - Link (Green)
LED
Indicators
1 - Activity (Amber)
Humidity 20~80% RH
Operating
Temperature
5°C to 50°C (41°F to 122°F)
Storage
Temperature
-25°C to 70°C (-13°F to 158°F)
Shipping
(Package)
5.3 oz [150 g]
www.startech.com
1 800 265 1844