User Manual

ManualsBrandsStarTech ManualsComputers & AccessoriesStarTech.com 4 Port PCI Express 2.0 SATA III 6Gbps RAID Controller Card with HyperDuo SSD Tiering - PCIe SATA 3 Controller Adapter

4 Port PCI Express SATA III 6Gbps RAID Controller Card with Heatsink

StarTech ID: PEXSAT34RH

The PEXSAT34RH 4-Port PCI Express SATA III Controller Card adds 4 AHCI SATA III ports to a computer through

a PCIe slot (x2), delivering multiple internal 6Gbps connections to high-performance hard drives and Solid State

Drives (SSDs), all from a single PCIe expansion slot.

The PCIe SATA controller card features Port Multiplier (PM) support on each port, which enables multiple SATA

drives to be connected through one of the ports over a single cable, for a total of 7 simultaneous drive connections –

(Connect up to 4 drives through PM on one port, and a single drive to each of the remaining 3 ports).

Supporting RAID 0, RAID 1 and 1+0 configurations, this versatile PCI Express SATA RAID card includes an

onboard heatsink to dissipate heat build-up, to help maintain peak operating performance even at full capacity.

This PCIe SATA 6gbps card is backed by a 2-year StarTech.com warranty and free lifetime technical support.

Applications

Upgrade an older PCIe-based system to SATA 6Gbps capability, to better utilize faster SATA drives

Add more internal SATA ports to a computer system, to connect additional storage drives and/or optical

drives

Provide optimized off-site back-ups/vaulting, through built-in RAID 1 capability

Perfect for multi-drive internal RAID storage solutions

www.startech.com

1 800 265 1844

Summary of content (5 pages)

PAGE 1
4 Port PCI Express SATA III 6Gbps RAID Controller Card with Heatsink StarTech ID: PEXSAT34RH The PEXSAT34RH 4-Port PCI Express SATA III Controller Card adds 4 AHCI SATA III ports to a computer through a PCIe slot (x2), delivering multiple internal 6Gbps connections to high-performance hard drives and Solid State Drives (SSDs), all from a single PCIe expansion slot.
PAGE 2
Features 4 AHCI SATA III (6Gbps) ports through PCI Express x2 Fully compliant with SATA 3.0 specifications and backward compatible with SATA I/II (1.5/3.0Gbps) drives Supports HDDs/SSDs/Optical/Blu-Ray drives Compliant with PCI Express 2.
PAGE 3
Technical Specifications Warranty Bus Type Card Type Chipset ID Industry Standards Industry Standards Interface Port Style Ports Connector Type(s) Internal Ports Supported RAID Modes Supported RAID Modes Supported RAID Modes Supported RAID Modes LBA support Max Drive Capacity Port Multiplier RAID Type and Rate OS Compatibility Product Height Product Length Product 2 Years PCI Express Standard Profile (LP bracket incl.) Marvell 88SE9230 PCI Express 2.0 Serial ATA 3.
PAGE 4
Weight Product 4.7 in [120 mm] Width Humidity 20% ~ 80% RH Operating 5°C ~ 50°C (41°F ~ 122°F) Temperature Storage -25°C ~ 70°C (-13°F ~ 158°F) Temperature System and Available PCI Express x2 slot (backward compatible with x4, x8, and x16 slots) Cable Requirements Note The maximum throughput of this card is limited by the bus interface. If used with PCI Express Gen 1.0 enabled computers, the max throughput is 2.5 Gbps per lane. If used with PCI Express Gen 2.
PAGE 5
Certifications, Reports and Compatibility www.startech.