Technical Specs

Instruction manual

Introduction

You can use the PEXM2SAT3422 to install two M.2 NGFF drives into your desktop

computer. The controller card is equipped with two SATA III (6Gbps) ports and supports

hardware RAID. With its adjustable standos and multiple mounting holes, the card

supports 110 mm, 80 mm, 60 mm, and 30 mm SSDs. The PEXM2SAT3422 comes with

both a full-prole and low-prole bracket, and installs into x4, x8, or x16 PCIe slots.

The PEXM2SAT3422 features wide installation compatibility, with support for virtually

all M.2 NGFF drives (22110, 2280, 2260, 2242, 2230), as well as hybrid drives.

Packaging contents

• 1 x M.2 SSD RAID controller card

• 1 x low-prole bracket

• 2 x M.2 mounting screws

• 1 x quick-start guide

System requirements

• Computer enabled with PCI Express® and an available PCI Express x4, x8, or x16 slot

• Screwdriver

• Any of the following operating systems:

• Windows® 10 (32-bit or 64-bit)

• Windows 8.1 (32-bit or 64-bit)

• Windows 8 (32-bit or 64-bit)

• Windows 7 (32-bit or 64-bit)

• Windows Server® 2012

• Windows Server 2008 R2

• Mac OS 10.8 and later (tested up to 10.11)

• Linux® 3.5

System requirements are subject to change. For the latest requirements, please visit