Installation Instructions

Features
Recover data or improve the performance and storage capacity of your desktop, by adding two M.2 solid-
state drives (SSD) plus two SATA III drives
Create a high-performance hardware RAID array to protect and back up your data or expand your
storage — supports RAID 0, 1, 10 (1+0)
Wide installation compatibility, with support for virtually all M.2 NGFF drives (22110, 2280, 2260, 2242,
2230), as well as hybrid drives
Port multiplier lets you connect up to seven drives total, including two M.2 drives
Two M.2 B-Key onboard sockets that support SATA III transfer speeds up to 6Gbps
Adjustable stand-offs, and multiple mounting holes support 110 mm, 80 mm, 60 mm, 42 mm, and 30 mm
SSDs
Fast, hassle-free setup with native support on most operating systems
Compliant with PCI Express 2.0 standards
Supports Native Command Queuing (NCQ), as well as ATA and ATAPI commands
PCIe bus-powered, or powered by your computer’s power supply using a 4-pin floppy power connector
(small drive power)
Equipped with a full-profile bracket, includes a low-profile (half-height bracket) for installation in small
form-factor computers
Installs into x4, x8, or x16 PCIe slots
www.startech.com
1 800 265 1844