Product Card

Warranty 2 Years
Hardware Bus Type PCI Express
Card Type Standard Profile (LP bracket incl.)
Industry Standards Serial ATA 3.0 specification - SATA I/II/III (1.5/3/6Gbps)
PCI Express 3.0
Interface M.2 SATA (NGFF)
SATA
M.2 PCIe (NVMe)
Port Style Integrated on Card
Ports 3
Performance ATAPI Support Yes
Bootable Yes
MTBF 50,000 Hours
Port Multiplier No
RAID No
Type and Rate SATA III (6 Gbps)
Connector(s) Connector Type(s) 1 - PCI Express x4 Male
Internal Ports 3 - M.2 (NGFF, B-Key) Receptacle
2 - SATA (7 pin, Data) Plug
Software OS Compatibility OS Independent; No additional drivers or software required
Note: When installed in a compatible operating system, the
card is natively supported and doesn’t require any additional
drivers or software. However, your operating system must
natively support PCIe SSDs (NVMe - Non-Volatile Memory
Express).
Special Notes /
Requirements
Note The maximum throughput of this card is limited by the bus
interface. If used with PCI Express Gen 1.0 enabled
computers, the max throughput is 2.5Gbps per lane. If used
with PCI Express Gen 2.0 enabled computers, the max
throughput is 5Gbps per lane.
System and Cable Requirements A computer enabled with PCI Express (PCIe), and an
available PCI Express x4, x8, or x16 slot
One or two SATA host ports on the host computer (for
example, the SATA controller card, or the motherboard
SATA ports inside of your computer)
www.startech.com
1 800 265 1844