User Manual

8
To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support
4. Insert the two Bracket Screws through the Adapter and
into the Low-Prole Bracket.
5. Using a Phillips Head Screwdriver tighten the Bracket
Screws in place being careful not to over-tighten.
Installing the Adapter in a Computer
1. Turn o the Computer.
2. Remove the case from the Computer. For more information
about how to properly do this, consult the documentation
that came with your computer system.
3. Place the Adapter into an available PCIe Slot.
4. Insert a Computer Case Screw (not included) into the Case
Mounting Hole on the Bracket and tighten it into place.
5. Replace the cover on the Computer and turn on the
Computer.
6. When you install the Adapter into the Computer and the
OS automatically installs the necessary software, the Drive
is accessible as though it is installed internally in the system.
Before you use the Drive, you need to prepare it for use and
format it according to the requirements of your OS.