User Manual
Table Of Contents
- Compliance Statements
- Safety Statements
- Product Diagram
- Top View
- Rear View
- RJ45 Pin Assignment
- RS-232 DB9 Pin Assignment
- Product Information
- Package Contents
- Installation
- DIN Rail Mounting
- Load Default Settings/System Reset Button
- Load Default Settings
- System Reset
- Broadcast Search
- Using the Web Console
- Accessing the Web Console
- Changing/Setting a Login ID and Password
- Configuring System Network Settings
- System Status
- Load Default Setting
- Firmware Update
- Configuring TCP Mode
- Configuring UDP Mode
- UART
- Resetting the Device
- Virtual COM Software Operation
- Installing the Virtual COM Software
- Configuration the Virtual COM Software
- Setting Up COM Mapping
- TCP/UDP Settings
- LED Indicators
31
To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support
LED Indicators
LED Name Status Description
Ready
On
Power is on and the device is
ready.
O
Power is o or the device is
not ready.
Link/Act
On UTP is link.
Blinking UTP Tx/Rx is activity.
O UTP is not link.
Tx/Rx
Blinking
RS-232 port is transmitting
or receiving data.
O
No data is transmitting or
receiving in RS-232 port.