User Manual
Table Of Contents
- Compliance Statements
- Safety Statements
- Product Diagram
- Top View
- Rear View
- RJ45 Pin Assignment
- RS-232 DB9 Pin Assignment
- Product Information
- Package Contents
- Installation
- DIN Rail Mounting
- Load Default Settings/System Reset Button
- Load Default Settings
- System Reset
- Broadcast Search
- Using the Web Console
- Accessing the Web Console
- Changing/Setting a Login ID and Password
- Configuring System Network Settings
- System Status
- Load Default Setting
- Firmware Update
- Configuring TCP Mode
- Configuring UDP Mode
- UART
- Resetting the Device
- Virtual COM Software Operation
- Installing the Virtual COM Software
- Configuration the Virtual COM Software
- Setting Up COM Mapping
- TCP/UDP Settings
- LED Indicators
28
To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support
3. Click the Add button.
4. The Add VCON screen will appear.
Add VCON Screen
5. Fill out the following elds to add a VCON:
• TCP/UDP: Choose a network protocol.
• Server/Client: Choose either Server or Client.
• IP Address: Enter the IP Address.
• Local Port: Enter a local port number.
• COM: Enter a Virtual COM port number.
• Remote Port: Enter a remote port number.
6. Click OK to create the COM Mapping