User Manual
Table Of Contents
- Compliance Statements
- Safety Statements
- Product Diagram
- Top View
- Rear View
- RJ45 Pin Assignment
- RS-232 DB9 Pin Assignment
- Product Information
- Package Contents
- Installation
- DIN Rail Mounting
- Load Default Settings/System Reset Button
- Load Default Settings
- System Reset
- Broadcast Search
- Using the Web Console
- Accessing the Web Console
- Changing/Setting a Login ID and Password
- Configuring System Network Settings
- System Status
- Load Default Setting
- Firmware Update
- Configuring TCP Mode
- Configuring UDP Mode
- UART
- Resetting the Device
- Virtual COM Software Operation
- Installing the Virtual COM Software
- Configuration the Virtual COM Software
- Setting Up COM Mapping
- TCP/UDP Settings
- LED Indicators
24
To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support
6. When the VCOM software has been downloaded, navigate to
the Start Menu or Desktop and select VCOM.
7. The Main screen will appear.
Main Screen
8. Select the Search button to locate all Devices that are
connected to the same LAN as your computer. Since the
Search function searches by MAC address and not IP address,
all connected devices to the LAN will be located, regardless
of whether or not they are part of the same subnet as the
host.