User Manual
Table Of Contents
- Compliance Statements
- Safety Statements
- Product Diagram
- Top View
- Rear View
- RJ45 Pin Assignment
- RS-232 DB9 Pin Assignment
- Product Information
- Package Contents
- Installation
- DIN Rail Mounting
- Load Default Settings/System Reset Button
- Load Default Settings
- System Reset
- Broadcast Search
- Using the Web Console
- Accessing the Web Console
- Changing/Setting a Login ID and Password
- Configuring System Network Settings
- System Status
- Load Default Setting
- Firmware Update
- Configuring TCP Mode
- Configuring UDP Mode
- UART
- Resetting the Device
- Virtual COM Software Operation
- Installing the Virtual COM Software
- Configuration the Virtual COM Software
- Setting Up COM Mapping
- TCP/UDP Settings
- LED Indicators
23
To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support
Resetting the Device
1. From the Home screen, click the Restart link on the left-hand
side of the screen.
2. The UART Mode screen will appear.
3. Press the Reset button to rest the NETRS2321P.
Virtual COM Software Operation
The Virtual Com application lets you install and congure your
NETRS2321P easily over the network. Five function groups are
provided to ease the installation process, allow COM mapping,
and provide monitoring and IP location server functions.
Installing the Virtual COM Software
1. Using a web browser, navigate to www.startech.com/
NETRS2321P.
2. On the Product page, click the Support tab located in the
middle of the screen.
3. In the Drivers and Downloads section, click on the driver link
that corresponds with the operating system running on the
host computer.
4. When the download is complete, right-click the zip folder
and select Extract All.
5. In the list of extracted les, right-click the vcomsetup.exe le
and select Run as Administrator and follow the on-screen
prompts to complete the installation.