User Manual
Table Of Contents
- Compliance Statements
- Safety Statements
- Product Diagram
- Top View
- Rear View
- RJ45 Pin Assignment
- RS-232 DB9 Pin Assignment
- Product Information
- Package Contents
- Installation
- DIN Rail Mounting
- Load Default Settings/System Reset Button
- Load Default Settings
- System Reset
- Broadcast Search
- Using the Web Console
- Accessing the Web Console
- Changing/Setting a Login ID and Password
- Configuring System Network Settings
- System Status
- Load Default Setting
- Firmware Update
- Configuring TCP Mode
- Configuring UDP Mode
- UART
- Resetting the Device
- Virtual COM Software Operation
- Installing the Virtual COM Software
- Configuration the Virtual COM Software
- Setting Up COM Mapping
- TCP/UDP Settings
- LED Indicators
21
To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support
UART Screen
3. The following settings can be congured:
• Baud Rate: Set the baud rate of UART interface. The
NETRS2321P supports 110, 300, 1200, 2400, 4800, 9600,
19200, 38400, 57600, 115200 and 230400bps baud rates.
• Character Bits: Set the number of data length of UART
interface. The NETRS2321P supports character bits of 5, 6,
7, or 8 bits.