User Manual
Table Of Contents
- Compliance Statements
- Safety Statements
- Product Diagram
- Top View
- Rear View
- RJ45 Pin Assignment
- RS-232 DB9 Pin Assignment
- Product Information
- Package Contents
- Installation
- DIN Rail Mounting
- Load Default Settings/System Reset Button
- Load Default Settings
- System Reset
- Broadcast Search
- Using the Web Console
- Accessing the Web Console
- Changing/Setting a Login ID and Password
- Configuring System Network Settings
- System Status
- Load Default Setting
- Firmware Update
- Configuring TCP Mode
- Configuring UDP Mode
- UART
- Resetting the Device
- Virtual COM Software Operation
- Installing the Virtual COM Software
- Configuration the Virtual COM Software
- Setting Up COM Mapping
- TCP/UDP Settings
- LED Indicators
20
To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support
• Remote Address: The remote address table allows users
to set several remote site IP addresses and ports. When
sending data, the device will send UDP data to the IP
addresses in the table.
4. Once you have completed making changes, press the
Update button to store the data.
5. Reset the device for the changes to take eect.
UART
UART or Universal Asynchronous Receiver Transmitter refers to
the RS-232 serial port of the device. All of the port settings can
be modied from the UDP screen.
1. From the Home screen, click the UART link on the left-hand
side of the screen.
2. The UART Mode screen will appear.