User Manual
Table Of Contents
- Compliance Statements
- Safety Statements
- Product Diagram
- Top View
- Rear View
- RJ45 Pin Assignment
- RS-232 DB9 Pin Assignment
- Product Information
- Package Contents
- Installation
- DIN Rail Mounting
- Load Default Settings/System Reset Button
- Load Default Settings
- System Reset
- Broadcast Search
- Using the Web Console
- Accessing the Web Console
- Changing/Setting a Login ID and Password
- Configuring System Network Settings
- System Status
- Load Default Setting
- Firmware Update
- Configuring TCP Mode
- Configuring UDP Mode
- UART
- Resetting the Device
- Virtual COM Software Operation
- Installing the Virtual COM Software
- Configuration the Virtual COM Software
- Setting Up COM Mapping
- TCP/UDP Settings
- LED Indicators
19
To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support
UDP Mode Screen
3. The following settings can be congured:
• Mode:
• Disabled: When UDP mode is enabled, TCP mode will
be disabled automatically. In UDP mode, the Local Port
will be assigned to this device. You can list the remote
connection IP and Port for up to 10 remote devices.
• Listen: When in UDP Listen mode, it can only receive
remote UDP data.
• Normal: When in UDP Normal mode, it can both receive
and send UDP data to
remote units.
• Local Port: Assign the UDP port that this unit listens on.