User Manual

18
To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support
Note: CLI mode is only available when NETRS2321P is in TCP
Server Mode.
• Port Number: This assigns the TCP server port number
that the server will listen on for connecting clients (Only
for TCP Server Mode).
• Remote Server IP Address: When in Client mode, this
device will automatically try to connect to the remote TCP
server with this IP address.
• Client Mode Inactive Timeout: When in Client mode,
this parameter sets the time that device will maintain a
connection until timeout, if there is no data transfer over
the connection. After disconnecting, the device will try to
build a new connection again immediately.
• Server Mode Protect Timeout: When in Server mode,
this parameter sets the time that device will maintain a
connection until timeout, if there is no data transfer over
the connection. Once disconnected, only a Client can
initiate a new connection to the Server.
4. Once you have completed making changes, press the
Update button to store the data.
5. Reset the device for the changes to take eect.
Conguring UDP Mode
1. From the Home screen, click the UDP Mode link on the left-
hand side of the screen.
2. The UDP Mode screen will appear.