User Manual
Table Of Contents
- Compliance Statements
- Safety Statements
- Product Diagram
- Top View
- Rear View
- RJ45 Pin Assignment
- RS-232 DB9 Pin Assignment
- Product Information
- Package Contents
- Installation
- DIN Rail Mounting
- Load Default Settings/System Reset Button
- Load Default Settings
- System Reset
- Broadcast Search
- Using the Web Console
- Accessing the Web Console
- Changing/Setting a Login ID and Password
- Configuring System Network Settings
- System Status
- Load Default Setting
- Firmware Update
- Configuring TCP Mode
- Configuring UDP Mode
- UART
- Resetting the Device
- Virtual COM Software Operation
- Installing the Virtual COM Software
- Configuration the Virtual COM Software
- Setting Up COM Mapping
- TCP/UDP Settings
- LED Indicators
17
To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support
TCP Mode Screen
3. The following settings can be congured:
• Telnet Server/Client: Set the device to be a Telnet Server.
In server mode, the Telnet port listens and waits for a
host or other client to make a connection. In this case the
Ethernet connected device is the client.
• Reverse Telnet: Reverse Telnet works the same as Telnet
Server mode. The Telnet port is listens for a connection
after booting up. If you encounter errors when using some
Telnet clients, such as the Microsoft interpretation of Telnet
for Windows XP you can try the connection using Reverse
Telnet mode.
• CLI Mode: The Command Line Interface (CLI) allows user
to congure and control NETRS2321P directly through the
UART interface.